N06059/alloy 59

    

Introduction

Alloy 59 is a nickel-chromium-molybdenum alloy with high mechanical strength and excellent corrosion resistance. The alloy also possesses high resistance to stress corrosion cracking, chloride pitting and oxidizing and reducing media.

The following datasheet will provide more details about alloy 59.

Chemical Composition

The following table shows the chemical composition of alloy 59.

Element Content (%)
Nickel, Ni 56 - 63
Chromium, Cr 22 - 24
Molybdenum, Mo 15 - 16.5
Iron, Fe ≤1.5
Manganese, Mn ≤0.5
Cobalt, Co ≤0.3
Aluminum, Al 0.1-0.4
Silicon, Si ≤0.1
Phosphorous, P ≤0.015
Carbon, C ≤0.01
Sulfur, S ≤0.005

Physical Properties

The physical properties of alloy 59 are outlined in the following table.

Properties Metric Imperial
Density 8.6 g/cm³ 0.311 lb/in³

Mechanical Properties

The mechanical properties of alloy 59 are outlined in the following table.

Properties Metric Imperial
Tensile strength (@sheet and strip 0.5 to 6.4 mm) 690 MPa 100000 psi
Yield strength (@rod, bar, forgings > 100 mm) 320 MPa 46400 psi
Modulus of elasticity 210 GPa 30500 ksi
Elongation at break 40% 40%

Thermal Properties

The thermal properties of alloy 59 are given in the following table.

Properties Metric Imperial
Thermal expansion coefficient (@20-100°C/68-212°F) 11.9 µm/m°C 6.61 µin/in°F
Thermal conductivity 10.4 W/mK 72.2 BTU in/hr.ft².°F

Applications

The following are some of the major applications of alloy 59:

  • Flue gas scrubber components
  • Pulp and paper industry
  • Sulfuric acid coolers
  • Seawater equipment
  • Waste incinerators

Stock

Form

Specification

Supply Form

Others

Sheet

Thickness?0.40-4.75mm?General Width?1000?1219?1500mm

Whole Coil or piece of it

Cold Annealed?Surface 2B?2E

Plate

Thickness?4.76-60mm?Width?1500?2000?2500mm?Length?3000?6000?8000?8500mm?Under 10mm plate can be coiled?

Whole Coil or piece of it

Single hot rolling?Solid solution annealed state?Surface 1D

Belt

Thickness?0.10-3.0mm?Width?50-500mm

Whole Coil or Specified size

Cold Annealed?Surface 2B?2E

Bar & Rod

Rolled barΦ5-45mm?Length≤1500mm

Polished Bar?circle?Square?

Solution annealing,descaling

Forged barΦ26-245mm?Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm?Wall Thickness0.25-4.00mm?Length?≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm?Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin?America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Tianjin Hengtai Industry & Trade Co., Ltd.
TEL:+86(0)22-82126768-618  
FAX: +86(0)22-82163689
Email: kevin.chen@timetals.com 津ICP备09000679号-1
在线客服乐语