N06600

 

   

Introduction

Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.

Chemical Composition of Inconel 600

The compositional range for Inconel 600 is provided in the table below.

Element

Content

Nickel (Ni)

72 % min

Chromium (Cr)

14 - 16 %

Iron (Fe)

6 – 10 %

Typical Properties of Inconel 600

Typical properties of Inconel 600 are covered in the following table.

Property

Metric

Imperial

Density

8.47 g/cm3

0.306 lb/in3

Melting point

1413 °C

2575°F

Co-Efficient of Expansion

13.3 µm/m.°C
(20-100°C)

7.4x10-6 in/in.°F
(70-212 °F)

Modulus of rigidity

75.6 kN/mm2

10965 ksi

Modulus of elasticity

206 kN/mm2

29878 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply

Heat Treatment (After Forming)

Annealed/Spring Temper

Stress relive at 460°C (860°F) for 1hr and air cool.

Condition

Approx Tensile Strength

Approx Service Temp.

Annealed

600-750 N/mm2

87-109 ksi

-200 to +330°C

-330 to +625°F

Spring Temper

900-1250 N/mm2

131-181 ksi

-200 to +330°C

-330 to +625°F

Note – In both cases slight magnetism may occur below -120°C (-184°F)

Relevant Standards

Inconel 600 is covered by the following standards:

         BS 3075 and BS 3076 NA 14

         AMS 5687

         ASTM B166

Equivalent Materials

Inconel 600 is the tradename of Special Metals Group of Companies and equivalent to:

         W.NR 2.4816

         UNS N06600

         AWS 010

Applications of Inconel 600

Inconel 600 typically finds application in:

         Furnace components

         Chemical processing

         Food processing and

         Nuclear engineering.

Stock

Form

Specification

Supply Form

Others

Sheet

Thickness?0.40-4.75mm?General Width?1000?1219?1500mm

Whole Coil or piece of it

Cold Annealed?Surface 2B?2E

Plate

Thickness?4.76-60mm?Width?1500?2000?2500mm?Length?3000?6000?8000?8500mm?Under 10mm plate can be coiled?

Whole Coil or piece of it

Single hot rolling?Solid solution annealed state?Surface 1D

Belt

Thickness?0.10-3.0mm?Width?50-500mm

Whole Coil or Specified size

Cold Annealed?Surface 2B?2E

Bar & Rod

Rolled barΦ5-45mm?Length≤1500mm

Polished Bar?circle?Square?

Solution annealing,descaling

Forged barΦ26-245mm?Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm?Wall Thickness0.25-4.00mm?Length?≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm?Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin?America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

 

Tianjin Hengtai Industry & Trade Co., Ltd.
TEL:+86(0)22-82126768-618  
FAX: +86(0)22-82163689
Email: kevin.chen@timetals.com 津ICP备09000679号-1
在线客服乐语