N10675/B-3

 

    

Introduction

Super alloys are also referred to as high performance alloys. They contain many elements in a variety of combinations so as to achieve the desired result. These alloys can function under very high temperatures and severe mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance. Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

The following datasheet will provide more details about HASTELLOY(r) B-3.

Chemical Composition

The following table shows the chemical composition of HASTELLOY(r) B-3.

Element Content (%)
Nickel, Ni 65 min
Molybdenum, Mo 27-32
Cobalt, Co 3 max
Manganese, Mn 3 max
Tungsten, W 3 max
Iron, Fe 1-3
Chromium, Cr 1-3
Aluminum, Al 0.5 max
Copper, Cu 0.2 max
Niobium, Nb 0.2 max
Tantalum, Ta 0.2 max
Titanium, Ti 0.2 max
Vanadium, V 0.2 max
Zirconium, Zr 0.1 max
Phosphorus, P 0.03 max
Sulfur, S 0.01 max
Carbon, C 0.01 max

Physical Properties

The physical properties of HASTELLOY(r) B-3 are outlined in the following table.

Properties Metric Imperial
Density 9.13 g/cm³ 0.33 lb/in³

Mechanical Properties

The mechanical properties of HASTELLOY(r) B-3 are provided below.

Properties Metric Imperial
Tensile strength (0.125in.) 0.88 GPa 129 ksi
Yield strength (0.125in.) 0.44 GPa 64.5 ksi
Elongation at break (0.125in.) 57.50% 57.50%

Other Designations

Equivalent materials to HASTELLOY(r) B-3 are:

  • ASTM B333
  • ASTM B335
  • ASTM B366
  • ASTM B564
  • ASTM B619
  • ASTM B622

Application 

 

Stock

Form

Specification

Supply Form

Others

Sheet

Thickness?0.40-4.75mm?General Width?1000?1219?1500mm

Whole Coil or piece of it

Cold Annealed?Surface 2B?2E

Plate

Thickness?4.76-60mm?Width?1500?2000?2500mm?Length?3000?6000?8000?8500mm?Under 10mm plate can be coiled?

Whole Coil or piece of it

Single hot rolling?Solid solution annealed state?Surface 1D

Belt

Thickness?0.10-3.0mm?Width?50-500mm

Whole Coil or Specified size

Cold Annealed?Surface 2B?2E

Bar & Rod

Rolled barΦ5-45mm?Length≤1500mm

Polished Bar?circle?Square?

Solution annealing,descaling

Forged barΦ26-245mm?Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm?Wall Thickness0.25-4.00mm?Length?≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm?Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin?America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Tianjin Hengtai Industry & Trade Co., Ltd.
TEL:+86(0)22-82126768-618  
FAX: +86(0)22-82163689
Email: kevin.chen@timetals.com 津ICP备09000679号-1
在线客服乐语